Installation of the shower and bath
Hydraulic works carried out in the bathroom are mainly related to the installation of sanitary and other equipment useful in the bathroom, such as a washing machine. Plumber-tiler can also put in the bathroom, chosen by its owner, floor and wall tiles. To installed by a plumber devices, toilet bowl and urinal. This connection is more often found in bathrooms and sometimes requires an additional connection to the existing water supply and sewerage. The large bathrooms include both showers and bathtubs, which must be done properly bleed water. Plumber can also help us to tap selecting economic, e.g.,. One that will run on a photocell.
Installation and first use of the boiler
Hydraulic works carried out in a domestic boiler are mainly related to the installation of the boiler and the foundation and checking correct operation of the water meter. Counter water must be installed by an authorized plumber who will also make his sealing. In case of any doubt, will also check a meter on the water especially when he suddenly began to show much higher water consumption than before. Usually installed in the boiler room is also a boiler, water heater. After its installation, the current home plumber, could also make his first start and check thanks to proper operation. Household members will be happy with such a solution, especially if the first use of the gas boiler.
Some facts about water heating
Circulating hot water can be used for central heating. Sometimes these systems are called hydronic heating systems.15
Common components of a central heating system using water-circulation include:
A supply of fuel, electric power or district heating supply lines
A Boiler (or a heat exchanger for district heating) which heats water in the system
Pump to circulate the water
Radiators which are wall-mounted panels through which the heated water passes in order to release heat into rooms.
The circulating water systems use a closed loop; the same water is heated and then reheated. A sealed system provides a form of central heating in which the water used for heating circulates independently of the building's normal water supply.
An expansion tank contains compressed gas, separated from the sealed-system water by a diaphragm. This allows for normal variations of pressure in the system. A safety valve allows water to escape from the system when pressure becomes too high, and a valve can open to replenish water from the normal water supply if the pressure drops too low. Sealed systems offer an alternative to open-vent systems, in which steam can escape from the system, and gets replaced from the building's water supply via a feed and central storage system.
Heating systems in the United Kingdom and in other parts of Europe commonly combine the needs of space heating with domestic hot-water heating. These systems occur less commonly in the USA. In this case, the heated water in a sealed system flows through a heat exchanger in a hot-water tank or hot-water cylinder where it heats water from the regular potable water supply for use at hot-water taps or appliances such as washing machines or dishwashers.
Expansion tank in a sealed system
Hydronic radiant floor heating systems use a boiler or district heating to heat water and a pump to circulate the hot water in plastic pipes installed in a concrete slab. The pipes, embedded in the floor, carry heated water that conducts warmth to the surface of the floor, where it broadcasts heat energy to the room above. Hydronic heating systems are also used with antifreeze solutions in ice and snow melt systems for walkways, parking lots and streets. They are more commonly used in commercial and whole house radiant floor heat projects, whereas electric radiant heat systems are more commonly used in smaller "spot warming" applications.